The Lacquer Channel Limited

Canadian mastering studio and lacquer cutting facility, operating under this name from 1976 until around end of 1987 when it was changed to [l=The Lacquer Channel].
The mastering and cutting facility was opened in house at [l=Phase One Studios] on November 15, 1976 with [a=Alan Moy] as the mastering engineer. It remained at Phase One until 1988, when they moved to their current location in Toronto, ON.
Mastering engineers included (late 1970s onwards), (later 1970s to early 1980s), (1970s), and .

Records cut at The Lacquer Channel Limited are identifiable by an etched "TLC" in the runouts. This is often followed by a suffix and/or initials (e.g. TLC-T GAM) which indicates either the brand of lacquer that was used in the cut and/or or the cutting engineer. [i]Please use Lacquer Cut At when crediting the company and Lacquer Cut By when crediting the engineer.[/i] [b]DO NOT USE for records cut after 1987.[/b]

Lacquer brands used:
TLC-AL (or TLC-A) = Lacquers
TLC-P = lacquers
TLC-T = lacquers
TLC-M = not yet identified lacquers

Cutting engineers:
GAM =
GG = (can look like GC or JC)
K.E.F or KF = (F can look like Z or Y)
nc. = (can look like OC or JC)
MW =
STM =
TM =
R.B. =